PW-6506

19" HIGH QUALITY WALL RACK 6U, 50 cm.

Characteristics of the 19” Wall Rack

• Design: 19: Wall Rack is designed three compartments, which consist of the front part, the middle part and the rear part. It is convenient to maintain.
• Material: The rack is made of 1.2 mm Electro-Galvanized Steel Sheet which is a thick, durable and 100% rustproof material.
• Frames: Vertical Mounted Frame is made of 2.0 mm Electro-Galvanized Steel Sheet which is a thick, durable and 100% rustproof material. It can be adjusted depending on the depth of the rack as requirement.
• Roof: The roof of rack can be installed the ventilating fan from 1 unit (standard) to 3 units (made to order).
• Front Door: The front door is 5 mm-transparency brown acrylic plastic which is thick and lightweight. It has a seal on the edge of the door to prevent dust. The front door has two Aluminum hinges and a turn-lock for security
• Side Panel: The side panel secures with a turn-lock and it is perforated to be well-ventilated.
• Bottom Rack: The bottom rack has a plate for covering and a hole with the dimensions 100 mm x 100 mm for putting cables through the hole. The additional ventilating fan can be installed at the bottom rack (Optional) 
• Ground System: There is the Ground System all parts of the rack with the earth cable kit.
• Color: The rack is a two-tone (light gray and dark gray ) which is coated with powder epoxy by Electro-Static System for strength.
• Accessories: The rack is designed to provide customers with M6 bolts, cage nuts and plastic washers.
• Quality Product Standard: The racks meet quality product standards which are ANIS/EIA-310D-1992 (Rev.EIA-310-C), IEC 60297-1, IEC 60297-2 BS 5954: Part 2, DIN 41494.
• Manufacturing standard: ISO 9001: 2000 Company